Go Back   Micro PC Talk Forums > Micro PC > Hardware

Reply
 
Thread Tools Display Modes
  #1  
Old 11-24-2007, 02:25 AM
Yeggster's Avatar
Yeggster Offline
Senior Member
 
Join Date: Aug 2007
Posts: 972
Awards Showcase
500 Posts UX Modification 100 Posts 
Total Awards: 3
Default Size of the UX's DC power plug
I was doing some internet searches on the plugs and could not easily find the exact specs on the size of the UX's DC in power plug, so I thought I'd post the reaearch here for reference.

The popular plugs go by several names some of which are ....
Barrel Plug
Coaxial Barrel Plug
Concentric Barrel plug (with center pin)

I carefully measured the plug with a set of digital caliperss and used various sized spring steel wires I have here to guage the inner post .. sizes rounded to the nearest 1/10 of a mm

There are FOUR sizes to deal with for the common barrel type power conectors (I'm talking the male end on the power brick wire)

The outer diameter of the barrel
the inner diameter of the barrel (yellow inner plastic on the UX original)
The inner pin diameter ... and
the length

Standards would seem to be in millimeters

The outer diameter of the plasic and metal "nose" is 6.5mm ..... with remainder of the barrel itself being slightly smaller at 6mm (we can assume this is to allow it to grip better)

The legth overall outer length of exposed plug before the black plastic is 9.14mm (I assume 9mm or 9.5 would be the nominal size)

The inner diameter of the barrel (yellow plastic in this case) is 4.3mm inside diameter

The inner pin is dificult to measure but with high maginfication and eyeballing the calpier spacing it appeared to be 1.2 to 1.5mm This is backed up by testing spring steel wire guages in the female plug on the dock. A 1mm will not "grab" at all and 1.2 and 1.4mm plug fit nice and snug

My best guess then at the name/size of this plug at that point was ....

6.5mm (with 4.3 mmm inner) X 1.4 mm center pin X 9mm or 9.5mm length

I searched this information and came up with the an EIAJ (Electronic Industires Association of Japan) standard plug that best fit these demensions called EIAJ-05 ... once I had that number it was easy to verify that it is one of Sony's standard power plugs.

Surprisingly the officaly designation of EIAJ-05 is seldom metioned even in technical catalogues or sales sheets, with only 30 odd hits on Google, most of the hits Googls does have are endless repeats on Wikipideas article on the subject.

EIAJ-05 ....... (official sizes 6.5 X 4.4 X 1.4 X 9.5 mm)
Radio Shack calls this a "T" plug (RS #273-1723) and it even has the yellow tip
Philmore calls it a 265 plug (female plug "214 PC jack")
CUI Inc. uses the number P16 (but it's reported as being non-standard with slightly looser tolerances)

The female mating plug is sometimes called "Lumberg 1613-11 or 1614-05"

With the iGo powerpacks it's called S11
With Targus it's tip #11
With Radio Shack it's their Type "T" plug
The Sourse in Canada does not show it on their site but it should be also be type "T"
Reply With Quote
  #2  
Old 11-24-2007, 03:32 PM
Benz145's Avatar
Benz145 Offline
Super Moderator
 
Join Date: Sep 2006
Posts: 2,296
Send a message via AIM to Benz145 Send a message via MSN to Benz145
Awards Showcase
Pirate Day 1000 Posts Extraordinary Member 100 Posts 
Total Awards: 7
Default
Thanks for all the info Yeg, I'm sure this will come in handy for someone in the future.
__________________
Sony VAIO UX180 | HP Mini 311 | iPhone 4

Writer for:
UMPCPortal.com
Carrypad.com
Notebooks.com
Reply With Quote
  #3  
Old 09-22-2009, 09:59 PM
vanzeenith Offline
Junior Member
 
Join Date: Sep 2009
Posts: 1
Default
"Thanks for all the info Yeg, I'm sure this will come in handy for someone in the future."
..yes thank you again
I have a Sony boombox that has this heavy sized jack-plug combo 6.5mm ..12v Dc 1500ma..4a fused power wart [brick] etc..that has been misplaced..nothing I have fits it ! and I have gobs of misc. wall warts [power bricks ] of misc votages, and power ratings
Sony is treating these power adapter plug sizes, just like their digital camera memory cards!...PROPIETARY..$$$
thank you
Reply With Quote
  #4  
Old 09-23-2009, 06:20 AM
souljaboy112 Offline
Senior Member
 
Join Date: Aug 2009
Location: Kuwait
Posts: 288
Awards Showcase
100 Posts 
Total Awards: 1
Default
with the Trust universal adapter its labeled "E and 6.5x1.0"
__________________
Toshiba TG01 1Ghz/4,1"/winmo phone
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT. The time now is 08:30 AM.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.